メインコンテンツにスキップ

Changes to Step #10

Edit by Marty Rippens

承認済みの編集 : Marty Rippens

削除
追加
変更なし

手順ライン

[* black] You may need to removeIf you are still having trouble with your handle, check the retaining bracket frompins inside the ends ofbag.
[* icon_note] When you depress
the handle. If your replacement handle assembly does not includebutton on the bottom bracket, simply removehandle, the two Phillips #1 screws.
[* black] Pull off
pins on the retaining bracket by sliding it off the endssides of the handle armsshould retract, freeing the handle to slide.
[* black] If either pin is not retracting use a pencil, screwdriver, or other thin object to push the pin into the hole
.
[* black] You may need to removeIf you are still having trouble with your handle, check the retaining bracket frompins inside the ends ofbag.
[* icon_note] When you depress
the handle. If your replacement handle assembly does not includebutton on the bottom bracket, simply removehandle, the two Phillips #1 screws.
[* black] Pull off
pins on the retaining bracket by sliding it off the endssides of the handle armsshould retract, freeing the handle to slide.
[* black] If either pin is not retracting use a pencil, screwdriver, or other thin object to push the pin into the hole
.