メインコンテンツにスキップ

手順6に変更

drmdolfanさんによる編集

承認済みの編集 : drmdolfan

変更なし

手順ライン

+[title] Remove speaker from housing
+[* black] After the PCB board is taken loose from the housing, we see that we have two wires attaching a small speaker to the housing,
+[* black] The speaker is easily removed with a thin pry tool slipped into the speaker cavity or, a lesser preferred method that I used, grab the two wires close to the speaker and carefully but firmly lift the front edge of the speaker upwards to get the initial adhesive to release. At that point you can grab the speaker and pull it out from the cavity.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加