メインコンテンツにスキップ

この手順に変更

drmdolfanさんによる編集

承認済みの編集 : drmdolfan

変更なし

手順ライン

+[title] Remove PCB from housing
+[* black] There are six phillips head screws holding the PCB to the housing (sort of....the two in the middle of the PCB hold the camera module to the board but go ahead and remove those too)
+[* black] Try the J00 phillips screwdriver bit on those screws
+[* black] Yeah I know, I really DID remove that FPC cable but didn't take the pic with it removed while the board was still attached.....

画像1

以前の画像はありません

追加