メインコンテンツにスキップ

手順4に変更

drmdolfanさんによる編集

承認済みの編集 : drmdolfan

変更なし

手順ライン

+[title] Remove the LCD cable from the PCB
+[* black] Look there! Did someone bleed on that FPC connector for the LCD or is that adhesive?
+[* black] Starting at the connector, you can take the 1.0 flat head bit from the ifixit toolkit and carefully scrape the bits of that semi-hard adhesive off the ends of the connector lock. Then slip the spudger between the lock and connector body to release the cable and remove the LCD

画像1

以前の画像はありません

追加