メインコンテンツにスキップ

手順 3 への変更

- oldnwstfによって編集

承認済みの編集 : oldnwstf

削除
追加
変更なし

手順ライン

[* green] Use a cloth or paper towel to cover the LCD and surroundings as you do not want to get any silicone lubricant there.
[* orange] Spray small amount of silicone lubricant onto the display hinges, where the silver part is.
[* light_blue] While you are there, check the three screws that hold the hinges for any play and re-tighten them if necessary.
[* icon_note] These screws sometimes come loose after years of everyday use, so it is a good idea to check the tightness anyway
[* icon_caution] Don't spray too much of lubricant onto the hinges, as it might puddle up and get trapped underneath the LCD!