手順4に変更
oldturkey03 — さんによる編集
- 前
- 後
- 変更なし
手順ライン
[* blue] Remove the screw on the bottom of the battery compartment. Keep this screw with the one removed on the previous step. These two screws have a different length than all the other screws. They are the shortest ones in the camera |
[* black] With those two screws removed, you can not separate the back part of the case. |
[* icon_caution] Flip the LCD to the right and out of the frame. Do NOT try to remove it yet. |
[* blue] Remove the screw screws that hold the LCD frame to the logic board. Keep the 3 screws separated from the rest of the screws, due to different length. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加