メインコンテンツにスキップ

手順 3 への変更

- Eric Essenによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Carefully lift the logic board up and pull it away from you.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. Warming the heatsink with a heatgun or blow dryer will help release the logic board.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. Warming the heatsink with a heatgun or blow dryer will help release the logic board.
[* icon_note] On 800 MHz and above G4s, you must disconnect the fan cable from the logic board before you lift the board entirely off.