メインコンテンツにスキップ

手順 2 への変更

- CaptFrostによって編集

承認済みの編集 : Andrew Optimus Goldheart

削除
追加
変更なし

手順ライン

[* black] Disconnect the 5 indicated connectors from the logic board, removing tape as necessary.
[* black] '''Reassembly Tip:''' Reseating the logic board will be much easier if you use kapton tape to hold these five connectors out of the way until it is in place.
[* black] '''Caution:''' If taping the connectors back, be careful not to use tape with anything but very weak adhesive (i.e. kapton tape). Even electrical tape can pull the paint off the hinges when removed.