メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順4に変更

Puruさんによる編集

承認の保留中

変更なし

手順ライン

[* black] We just finished repairing, Jack part and nowthe defective 3.5mm headphone jack part. Now we are repairing the ControlTalk button that has malfunctioned due to broken circuit or broken cable.
[* black]
Pull of the Talk pane using a plastic spade by lifting it gently. TakeThen pull off the middle part out carefully. You should be very careful here because, this part doesn't have any external screws or binders to hold this thing. Only the inbuilt tinny aligns that hold it together.
[* black]
Once you see the circuit board, examine if there is a broken circuit. Solder the circuit carefully. If White wire or any of the wires is apart from the designated points, solder it. And then simply putit carefully. A little excess solder will melt the pieces back. There's no screw to handle with. It just clips along and aligns well. Butneighboring elements. If you accidentally dropped or soldered on the plate circuit, be very careful aligning. They my simply break offpatient to take it apart securely. A little shake may destroy the whole plate. Stay focused during this process.
[* black] We just finished repairing, Jack part and nowthe defective 3.5mm headphone jack part. Now we are repairing the ControlTalk button that has malfunctioned due to broken circuit or broken cable.
[* black]
Pull of the Talk pane using a plastic spade by lifting it gently. TakeThen pull off the middle part out carefully. You should be very careful here because, this part doesn't have any external screws or binders to hold this thing. Only the inbuilt tinny aligns that hold it together.
[* black]
Once you see the circuit board, examine if there is a broken circuit. Solder the circuit carefully. If White wire or any of the wires is apart from the designated points, solder it. And then simply putit carefully. A little excess solder will melt the pieces back. There's no screw to handle with. It just clips along and aligns well. Butneighboring elements. If you accidentally dropped or soldered on the plate circuit, be very careful aligning. They my simply break offpatient to take it apart securely. A little shake may destroy the whole plate. Stay focused during this process.