メインコンテンツにスキップ

この手順に変更

- James Smithによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] After removing the battery and stylus, unscrew the 5 torxTorx screws (using a T-5 Torx screw driver) located in the first image below.
[* black] After removing the battery and stylus, unscrew the 5 torxTorx screws (using a T-5 Torx screw driver) located in the first image below.
[* black] Remove the small rubberized patch under the antennae as seen in the second image.
[* black] Now unscrew the last two screws using the same screw driver. The screws are located in the last image below.

画像3

古いバージョン

新しいバージョン