メインコンテンツにスキップ

手順 1 への変更

- brentpによって編集

編集が拒否されました。 : David Hodson

削除
追加
変更なし

手順ライン

[* black] Remove the following 12 screws securing the front bezel to the rear case:
[* red] Eight 13 mm T8 Torx.
[* orange] Four 25 mm T8 Torx.
[* icon_note] On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).
[* black] Another possible combination: The top 4 and left 2 are short (14mm), the right two and bottom corners are medium (18mm), and the bottom center two are extra long (31mm).