メインコンテンツにスキップ

手順 1 への変更

- johann bedaによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the following 12 screws securing the front bezel to the rear case:
[* red] Eight 13 mm T8 Torx.
[* orange] Four 25 mm T8 Torx.
[* icon_note] On 24" model A1225, bottom centre two are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).