メインコンテンツにスキップ

手順3に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the two silver T8 Torx screws from the black plastic bar.
[* black] Lift the black plastic bar out.
-[* black] Reassembly Tip: Reassembly will be significantly easier if you reseat the hard drive BEFORE returning the black bar to its place.
+[* icon_reminder] Reassembly will be significantly easier if you reseat the hard drive ***before*** returning the black bar to its place.