手順3に変更
- Austin Foxによって編集
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Locate the white cable on top of the camera where the eyepiece was. |
|---|---|
| + | [* black] Using tweezers, grasp the white cable as close to the connection point as possible. |
| + | [* black] Gently remove the cable from its connector. |
| + | [* black] Note: The cable should just slide out with a slight tug. |
| + | [* black] Remove the screw directly underneath the white cable. |