メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Brittany McCriglerさんによる編集

承認の保留中

変更なし

手順ライン

[* blackicon_caution] The front bezel is still attached to the iMac by the microphone cable.
[* blackicon_caution] The front bezel is still attached to the iMac by the microphone cable.
[* black] Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display.
[* black] Once the top edge of the front bezel has cleared the rear case, rotate the front bezel toward the stand and lift it off the rear case.
[* blackicon_reminder] When reinstalling the front bezel, start at the lower edge and make sure it is flush with the rear case before lowering the top edge onto the iMac.
[* blackicon_reminder] When reinstalling the front bezel, start at the lower edge and make sure it is flush with the rear case before lowering the top edge onto the iMac.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加