メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Dominik Schnabelrauchさんによる編集

承認済みの編集 : Dominik Schnabelrauch

削除済み
追加
変更なし

手順ライン

[* black] Remove theicon_note] The top and bottom frame sections by applying forcesection hold very tight to the mid frame. It is possible to pull them off with your hands. If you're not able to do so, use the following removal procedure:
[* black] Use the flat end of a spudger and apply preasure
to one sideof the corners of the frame section until it pops off.
[* icon_note] The covers are held together very firmly by plastic clasps, so do not be afraid to apply pressure
you create a small gap.
[* black] Remove theicon_note] The top and bottom frame sections by applying forcesection hold very tight to the mid frame. It is possible to pull them off with your hands. If you're not able to do so, use the following removal procedure:
[* black] Use the flat end of a spudger and apply preasure
to one sideof the corners of the frame section until it pops off.
[* icon_note] The covers are held together very firmly by plastic clasps, so do not be afraid to apply pressure
you create a small gap.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン