手順4に変更
- Richard Rattnerによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] After the panel has been removed, you should see two green circuit boards affixed to a larger blue circuit board. | |
| + | [* black] Don't worry about the one with wires attached, the RAM is the other circuit board. |
| + | [* black] Look for the silver tabs on either side of the white plastic holding the RAM in place. |
| + | [* black] Using your index fingers, lift both tabs. The RAM should partially "pop" out. |