メインコンテンツにスキップ

手順1に変更

Joseph Rasicoさんによる編集

承認済みの編集 : Joseph Rasico

変更なし

手順ライン

-[* red] Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head, then remove the one 3mm screw on the top left side of the device with the same method.
+[* red] Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.
+[* red] Remove the one 3mm screw on the top left side of the device with the same method.