Skip to main content

Changes to Step #3

Edit by Steve Van Hall

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* black] Position the camera so the bottom is facing up and the display away from the surface.
[* black] Gently pry the screen portion from the camera portion with your fingers or a plastic prybar.
[* icon_caution] Do not fully separate the two components! the screen is attached by two ribbon cables.
[* black] Lay the display flat to expose the circuit board and the display control ribbon cables.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added