修理を始めるには コミュニティ ストア

手順5に変更

- Davide Andreaによって編集

承認済みの編集 : Zephosk

前
後
変更なし

手順ライン

-[* black] Carefully remove the back cover off of the camera by hand, minding the ribbon cable attached to the camera body. If the cover does not detach, use a spudger to pry it off.
-[* red] Use the spudger tool to open the ZIF connector attaching the ribbon cable to the camera body.
+[* black] Carefully remove the back cover off of the camera by hand. Press the brown actuator in the FFC socket to release the FPC (Flexible Printed Circuit - brown cable attached to the back cover) and pull the FPC out of the socket.
+[* red] If the FPC doesn't come out easily, you haven't yet released it. Do not force it. Do not use a spudger because it will break the socket. A broken socket cannot be fixed and has to be replaced by a skilled technician.