Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.
[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Image 1

Old Version

New Version