メインコンテンツにスキップ

この手順に変更

- Jake Devincenziによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Set the new hard drive into the open area from where you removed the plastic positionerpositioner was.
[* black] Set the new hard drive into the open area from where you removed the plastic positionerpositioner was.
[* icon_note] Make sure that the connectors on the hard drive are facing down, as shown, otherwise you will not be able to install the drive.
[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive over the enclosure connectors.
[* black] Once the hard drive is snug, reinsert the plastic positionerpositioner, while holding the hard drive against the bottom of the enclosure.
[* black] Once the hard drive is snug, reinsert the plastic positionerpositioner, while holding the hard drive against the bottom of the enclosure.