メインコンテンツにスキップ

手順6に変更

Joshua Gatesさんによる編集

承認済みの編集 : Joshua Gates

変更なし

手順ライン

-[* icon_note] Using extreme care, separate the front of the case, from the back with a metal spudger, or pry tool. The case will scratch easily.
+[* icon_caution] Using extreme care, separate the front of the case, from the back with a metal spudger, or pry tool. The case will scratch easily.
[* black] The case joints can be hard to spot. They appear as a very fine line in the plastic. Start with light pressure until the seam parts, allowing the pry tool to work.