メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

David Hodsonさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Use a heat gun or hair dryer to soften the adhesive underneath the camera cover.
[* icon_note] The following steps were performed without the use of a heat gun. Notice that the camera cover cracks very easily if you do not heat the adhesive that holds it in place.
[* black] Gently pry up the bottom of the camera cover with a plastic opening tool.
[* black] Carefully slide the plastic opening tool across the bottom of the camera cover to free it from the adhesive.
[* black] Continue to use the heat gun as needed to soften the adhesive as you remove the camera cover.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加