メインコンテンツにスキップ

手順 10 への変更

- otreblaによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] The middle part of my power connector had been sheered a way from its solder points on the motherboard.
[* black] I had use a bit of flux, but I managed to re-tin all three contact point on the motherboard as well as the pins in the connector.
[* red] I re-soldered the whole thing and used my trusty hot glue gun to encase the whole connector to prevent it from happening again anytime soon.

画像1

以前の画像はありません

追加