メインコンテンツにスキップ

手順28に変更

Miroslav Djuricさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove the following five screws securing the logic board to the upper case:
- [* red] Four 3mm Phillips screws.
- [* orange] One 3.5mm Phillips screw.
+ [* red] Four 3 mm Phillips screws.
+ [* orange] One 3.5 mm Phillips screw.
[* yellow] Remove the two 7 mm Phillips screws securing the DC-in board to the upper case.
[* black] Lift the logic board from its left edge and pull it out of the upper case.