メインコンテンツにスキップ

手順8に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Use a spudger to pry the fan connector straight up off the logic board.
+[* black] Use a spudger to pry the fan connector straight up and out of its socket on the logic board.
+[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
+[* icon_caution] The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加