| - | [* red] Lift up (towards display) the pins on either side of the ribbon connector and then detach ribbon |
|---|
| - | [* black] In a different incarnation, the ribbon connector may be loosened by sliding the latch away from you, one side at a time, not lifting |
|---|
| - | [* icon_caution] Be very careful if using metal tools, you are working close to surface-mounted board components |
|---|
| + | [* red] Using a spudger, release the tabs on the keyboard ribbon cable ZIF connector. |
|---|
| + | [* icon_note] Depending on the variation of this model, the tabs on this ZIF connector will either flip up towards the display or push out towards the display. |
|---|