手順4に変更
- Mark Schroederによって編集
承認済みの編集 : Justin Ogihara
- 前
- 後
- 変更なし
手順ライン
| - | [* |
|---|---|
| + | [* orange] Remove the black ribbon cable from the motherboard. |
| [* orange] Use the tip of the plastic opening tool to push the black tabs on both sides of the white connector forward toward the display. | |
| [* orange] Pushing forward on one side will push the other side back toward the touch pad. Repeat the previous step until both black tabs will not move any farther. | |
| [* black] Carefully pull the black ribbon cable horizontally toward the display until it slides free from the white motherboard connector. If it does not move when pulling on it, repeat previous steps until it does. |