手順8に変更
- a_elzbieciakによって編集
承認済みの編集 : a_elzbieciak
- 前
- 後
- 変更なし
手順ライン
| [* black] With the screws removed, the black and sliver housing pieces should be able to shift apart from one another. | |
| - | [* |
| + | [* icon_caution] ''Caution: do not pull the device apart willy-nilly. There is an internal ribbon cable attached to both halves of the housing that can easily be damaged by doing so. Slow and steady wins the race. '' |
| [* black] Gently work the black and silver housing pieces away from one another. | |
| - | [* |
| + | [* icon_note] ''If the housing is a bit resistant to separating, it may help to use a pry tool along the bottom of the device where the two colors meet.'' |