メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

この手順に変更

Mario Tさんによる編集

承認の保留中

変更なし

手順ライン

[* yellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* icon_note] If you are only trying to remove the LCD power board, skip to step 5. For all other guides, ignore this note and proceed normally.
[*
red] Next removeRemove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* black] Finally removeRemove the board from the device.
[* icon_note] If you are only trying to remove the LCD power board, skip to step 5. For all other guides, ignore this note and proceed normally.
[*
red] Next removeRemove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* black] Finally removeRemove the board from the device.