Skip to main content

Changes to Step #5

Edit by Michal

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* black] Step 5 is about removing the cover which protects the processor from any outside damage
[* black] The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left.
[* black] CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
[* black] It can also be pushed from the inside (by lifting the bottom of the cover first) (see image 3)

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added