メインコンテンツにスキップ

手順19に変更

Moisesさんによる編集

承認済みの編集 : Adam O'Camb

削除済み
追加
変更なし

手順ライン

[* black] Connect both the SATA data and SATA power connectors to their respective sockets on the SSD.
[* black] Peel the backing off of the double sided tape.
[* black] Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.
[* icon_caution] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* icon_caution] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with the SSD's placement, firmly press down along its edges to ensure full adhesion.
[* icon_note] When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.