メインコンテンツにスキップ

手順17に変更

Walter Galanさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Route the new SATA cable through the indentation that the primary SATA cable goes through and into the optical drive bay.
[* black] Set the logic board back into place, being careful not to catch, cover, or pinch any cables.
[*[* icon_note] Be sure that the SATA cable has as much slack as possible and that it is not tangled with any other cables.
[*[* icon_note] Be sure that the SATA cable has as much slack as possible and that it is not tangled with any other cables.