メインコンテンツにスキップ

手順14に変更

Phillip Takahashiさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* red] Remove the eight T10 Torx screws securing the logic board and heat sink assembly to the iMac case.
[*
black] Insert wisdom hereSimultaneously lift and rotate the logic board and heat sink assembly away from the iMac case until you can easily access the back side of the logic board.
[* red] Remove the eight T10 Torx screws securing the logic board and heat sink assembly to the iMac case.
[*
black] Insert wisdom hereSimultaneously lift and rotate the logic board and heat sink assembly away from the iMac case until you can easily access the back side of the logic board.

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加