メインコンテンツにスキップ

手順13に変更

Walter Galanさんによる編集

承認済みの編集 : Walter Galan

削除済み
追加
変更なし

手順ライン

[* red] Locate the IR sensor located behind the black apple logo.
[* icon_note] If necessary, peel the tape covering the IR sensor.
[* black] Remove the IR sensor by pulling it straight up and out of the case.
[* icon_caution] Do not attempt to completely remove the IR sensor from the case as it is still attached to the logic board.