手順17に変更
- Paige Reismanによって編集
承認済みの編集 : Paige Reisman
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Gonna add a step before this one about cutting display adhesive (we missed a photo doing video, whoops) |
|---|---|
| - | [* black] After being foiled at the front of the display we turn to the hinge mount |
| - | [* black] Removing the hinge mount casing thing that's clipped on |
| - | [* black] Antennas, springs, loads of screws |
| - | [* black] Luckily we remove the right screws and not the exploding-springs-screws, and we're able to fairly painlessly remove the stand. |
| + | [* black] We temporarily shift our attention to a more screw-y, less glue-y portion of this desktop, one that we will hopefully have more luck in removing: the hinge mount. |
| + | [* black] The casing, attached by a few clips, comes off easily with just our hands. |
| + | [* black] Underneath the casing lurks a tube full of antennas, springs, and loads of screws. |
| + | [* icon_note] The springs, 80 in total, are what form the mechanism that allows the monitor to transition from vertical to nearly-horizontal with just a light touch. |
| + | [* black] Removing the final screws attached the stand to the display is like a game of Russian Roulette: some are spring-loaded while others are not. We test our odds, and manage to select all of the correct screws for removal, and detach the base. |
| + | [* black] Hopefully this stroke of luck will guide us through the tricky display opening as well.... |