手順7に変更
- Paige Reismanによって編集
承認済みの編集 : Paige Reisman
- 前
- 後
- 変更なし
手順ライン
| [* black] With all the plastic bits out of the way, we can finally dig into the important parts of of the Studio. | |
| - | [* black] We start with the high-powered half of the machine's hybrid hard disk |
| + | [* black] We start with the high-powered half of the machine's hybrid hard disk: a standard, removable 64 GB SanDisk M.2 SSD: |
| [* red] SanDisk 05466 032G 32 GB NAND flash storage module (x2 for a total of 64 GB) | |
| [* orange] Silicon Motion [http://www.siliconmotion.com/download.php?t=U0wyRnpjMlYwY3k4eU1ERTBMekE0THpBeEwzQnliMlIxWTNRNE1qYzRNakU1T1RNMkxuQmtaajA5UFZOTk1qSTBObGhVSUZCeWIyUjFZM1FnUW5KcFpXWmZUakEyTVRBPUM%3D|SM2246XT|new_window=true] SATA III 6 Gb/s DRAM-less SSD Controller | |
| - | [* icon_note] Amusingly, somewhere along the line, someone must have decided it |
| - | [* black] Or it was more efficient to leave extra spots for the high-end 128 GB models. Either way if you have a couple flash storage modules and a hot air rework station lying around the SSD controller will happily take up to four NAND flash devices. |
| + | [* icon_note] Amusingly, somewhere along the line, someone must have decided it would be more efficient to slap down two 32 GB chips, rather than four 16 GB chips, leaving a pair of empty solder pads. |
| + | [* black] Or it was more efficient to leave extra spots for the high-end 128 GB models. Either way, if you have a couple flash storage modules and a hot air rework station lying around the SSD controller will happily take up to four NAND flash devices. |