Skip to main content

Changes to Step #2

Edit by Mike

承認済みの編集 by Mike

Deleted
Added
Unchanged

Step Lines

[* black] Next, you will need to remove the circular dust cover located on the speaker (Photo from step one: redblue arrow). This is done through the use of the metal spudger tool. Use the corner of the spudger to peel underneath the cover until you can simply lift it by hand. The cover is held onto the device with adhesive and should be removed slowly.
[* black] Next, you will need to remove the circular dust cover located on the speaker (Photo from step one: redblue arrow). This is done through the use of the metal spudger tool. Use the corner of the spudger to peel underneath the cover until you can simply lift it by hand. The cover is held onto the device with adhesive and should be removed slowly.