メインコンテンツにスキップ

手順2に変更

Mikeさんによる編集

承認済みの編集 : Mike

削除済み
追加
変更なし

手順ライン

[* black] Next, you will need to remove the circular dust cover located on the speaker (Photo from step one: red arrow). This is done through the use of the metal spudger tool. Use the corner of the spudger to peel underneath the cover until you can simply lift it by hand. The cover is held onto the device with adhesive and should be removed slowly.

画像1

以前の画像はありません

追加