メインコンテンツにスキップ

この手順に変更

Adam Ferraroさんによる編集

承認済みの編集 : Adam Ferraro

変更なし

手順ライン

[* black] Using the small plastic spudger, pry the shorter sides of the device apart.
-[* black] Insert the small plastic spudger into the gap that has formed at the top of the device and slide it along the top of the device. Repeat for the bottom of the device.
-[* icon_caution] Do not disconnect or tear the ribbon wiring, located at the top of the motherboard, when removing the back of the device.
+[* black] Once a gap has formed at the top of the device, insert the small plastic spudger into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
+[* icon_caution] Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.