メインコンテンツにスキップ

手順4に変更

Eduardo Duranさんによる編集

承認済みの編集 : Eduardo Duran

変更なし

手順ライン

-[* black] Remove the two screws that are located on the top corners of the device.
+[* black] Remove the two screws that are located on the top corners of the device with the same phillips screwdriver..
[* icon_note] Make sure to have your magnetic board to hold your screws!
[* black] Next, unplug the ZIF connector and slide it out with the pointed side of the spudger.
+[* black] To unclip the connector, go under the black tap and simply lift with your finger nail or spudger.