メインコンテンツにスキップ

手順7に変更

Isaacさんによる編集

承認済みの編集 : Isaac

変更なし

手順ライン

[* black] Flip motherboard over.
-[* icon_note] Directly underneath the USB Charging connector will be four solder points the need to be undone to remove the charging port.
+[* red] Directly underneath the USB Charging connector will be four solder points the need to be undone to remove the charging port.
[* black] Insert new port with correct orientation and apply new solder to attach port to motherboard.
[* icon_caution] Due to high heat motherboard can be damaged if heat sink is not used.