メインコンテンツにスキップ

手順7に変更

Gilberto Ambrizさんによる編集

承認済みの編集 : Gilberto Ambriz

変更なし

手順ライン

+[* black] Flip motherboard over.
+[* icon_note] Directly underneath the USB Charging connector will be four solder points the need to be undone to remove the charging port.
+[* black] Insert new port with correct orientation and apply new solder to attach port to motherboard.
+[* icon_caution] Due to high heat motherboard can be damaged if heat sink is not used.