メインコンテンツにスキップ

手順2に変更

Kristen Gismondiさんによる編集

承認済みの編集 : Kristen Gismondi

変更なし

手順ライン

[* black] Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the sides and the top seemsseams if need be.
[* icon_caution] Do it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard, as well as don't completely separate the halves as this can tear the ribbon cable as wellcable.
[* black] Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the sides and the top seemsseams if need be.
[* icon_caution] Do it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard, as well as don't completely separate the halves as this can tear the ribbon cable as wellcable.