メインコンテンツにスキップ

手順2に変更

Patrick McNettさんによる編集

承認済みの編集 : Patrick McNett

変更なし

手順ライン

[* icon_cautionblack] Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the seemsides and the top seems if need be, but dobe.
[* icon_caution] Do
it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard.
[* icon_caution] When opening the device, do not
motherboard, as well as don't completely separate the two halves,halves as this can tear the ribbon cable as well.
[* icon_cautionblack] Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the seemsides and the top seems if need be, but dobe.
[* icon_caution] Do
it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard.
[* icon_caution] When opening the device, do not
motherboard, as well as don't completely separate the two halves,halves as this can tear the ribbon cable as well.