メインコンテンツにスキップ

手順2に変更

Patrick McNettさんによる編集

承認済みの編集 : Patrick McNett

変更なし

手順ライン

[* icon_caution] Use the plastic opening tool to pry open the devicedevice at the seam where the two halves meet, prying all along the seem if need be, but do it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard. Also
[* icon_caution] When opening the device,
do not completely separate the two halves, as this can tear the cable as well.
[* icon_caution] Use the plastic opening tool to pry open the devicedevice at the seam where the two halves meet, prying all along the seem if need be, but do it slowly so you don't accidently rip the ribbon cable that connects the digitizer to the motherboard. Also
[* icon_caution] When opening the device,
do not completely separate the two halves, as this can tear the cable as well.