メインコンテンツにスキップ

手順5に変更

Casさんによる編集

承認済みの編集 : Evan Noronha

変更なし

手順ライン

-[* black] Remove the logic/motherboard.
-[* black] Push the motherboard from the keypad side, it should pop out
-[* icon_caution] Be careful with:
- [* red] the small clips...
- [* green] ...and the rubber USB port plug :)
-[* black] Start loosening the board from the end with the 2 red circles.
+[title] Removing the logic/motherboard
+[* light_blue] Unclip the keypad/screen ribbon cable
+[* blue] Unclip the camera
+[* red] Unclip the small tabs holding the motherboard down and slide it out.
+ [* icon_caution] Lift the motherboard up from the opposite side to the usb port
+ [* icon_note] To aid removal gently push the motherboard from the keypad side.

画像1

古いバージョン

新しいバージョン