メインコンテンツにスキップ

手順2に変更

Taylor Arnicarさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* icon_note] We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board.
[* black] Turn over the computer and open it.
[* red] Remove the 3 Phillips screws from the edges of the keyboard area.
[* icon_reminder] The shorter screw goes in the lower left corner. LeftThe left corner is indicated by ana blue "L" in the photograph and is on the right side.
[* icon_reminder] The shorter screw goes in the lower left corner. LeftThe left corner is indicated by ana blue "L" in the photograph and is on the right side.