手順2に変更
David Kline — さんによる編集
- 前
- 後
- 変更なし
手順ライン
[* icon_note] We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board. |
[* black] Turn over the computer and open it. |
[* red] Remove the 3 Phillips screws from the edges of the keyboard area. |
[* icon_reminder] The shorter screw goes in the lower left corner. Left corner is indicated by an "L" in the photograph and is on the right side. |
[* icon_reminder] The shorter screw goes in the lower left corner. Left corner is indicated by an "L" in the photograph and is on the right side. |
画像1
古いバージョン
新しいバージョン